How to Enlarge Your Lightsource for Softer Light, easily.

I did a little experiment this evening just to demonstrate how to make a really large lightsource and give much more even light on your subject than just blasting away with direct light.

I have two 65x65cm light boxes that are quite handy. So here is a pic of them set up pointing directly at a nice Dutch vase. The camera was on the tripod in front of the table.

From here it looks like that should make for some pretty good light on the vase, but as we can see in the next photo they also leave some not so great specular highlights on the vase and two distinct shadow areas behind the vase.

Not a bad photograph as such, but we can do much better than that! So, in order to increase the overall size of the light source I simply faced the lights up at the ceiling. Of course I also had to increase the power output of the lights because the light now had much further to travel and the inverse square law robs us of light very quickly when we increase the distance the light has to travel.

As you can see from the pic above the light has now been spread over a much larger area. So what has that done for our lovely Dutch vase?

Well the first thing you notice is that the ugly specular highlights have vanished and the light is much more evenly spread on the vase itself. The second thing is that the shadows behind the vase have also disappeared. Overall a much more pleasing result!

If all you have are two speedlights instead of the bigger studio lights then don't be disheartened because the exact same principle still holds true and will work just great. Simply pump up the power a bit and let 'er rip, it will have a similar wonderful softening effect on the quality of light.

Happy product photographing folks!

Photographing an Easter Egg Display

My wonderfully creative wife made a beautiful little Easter Egg display and I just had to photograph it... before I eat and demolish it! ;-) Love you Älskling! ♥

...and a quick pull back shot to show how simple the lighting is:

Another Take on Photographing a Bottle of Wine

As you know I recently posted something on shooting a bottle of wine in a light tent, to see it CLICK HERE.

Well, this time around I wanted to try something a little different than the last shoot and go for an entirely different look.
So I ditched the light tent and set up with a single Elinchrom D-Lite-it 2 with a 65x65cm light-box, and attached a strip of black card-stock to the front of it with two black clothing pegs effectively covering about 50% of the light-box straight down the middle. I also had two strips of black card-stock on either side of the bottle to subtract some light from the light-box behind the bottle of wine. There were also two light stands on the table with some white A4 sheets of paper clamped and placed to reflect some light back onto the bottle of wine. Maybe this is a little complicated, so let me just show you a picture:

The wine bottle is on top of two glasses which were a simple matter to edit out afterwards. The end result looks ok to me. :-)

And now, the same bottle of wine and same basic set-up as above, but this time I put the bottle onto a different surface. It really changes the whole look of the end result:

One Bottle of Wine, One Light Tent and Two Elinchrom D-lite-it 4's.

A very simple set-up to photograph the bottle of Pomerol wine shown above:

The two Elinchrom 65x65cm soft-boxes fired through the sides of the light tent make for beautifully soft light. Next time I will add a few black flags inside the light tent to subtract strips of light in some areas of the bottle to add a bit more interest. As it is I think it turned out quite well.

Now for the best part, savouring the wine! (Where did I put the cheese and crackers?)

Nikon D300s, Manual Mode, f11.0, ISO200, 1/250s, Hand held, Nikkor 40mm f/2.8G AF-S DX Micro, 80x80cm light tent, 2xElinchrom D-Lite-it 4's shot through their softboxes on either side of the tent.

How Getting Creative with White Balance can add a little Zing to your Product Photography!

Ok, so how to add a little something to a pic by fiddling with the white balance a bit? First, I took a standard pic of my daughters sneakers. What do you mean that's not something you usually do? Just go with the flow and stop arguing with me ok!

Standard pic of daughters sneakers:

This was taken with two Speedlights to light the sneakers, an sb700 to camera left on a light stand firing into a black-backed umbrella and providing the main light from the front. There is also an sb600 with a home made gobo shooting onto the white wall behind the subject (sneakers) to provide a second soft light from behind.

The result is not bad lighting wise, but what if we wanted to add another element to this to change, and hopefully improve, the look?



So what I did was attach the incandescent filter that comes with the sb700 to the front of the sb700 that was giving me my main light. It was on a light stand shooting into a black backed umbrella from camera left a little up. (See the set-up/pull-back shot further down.) The pic below is of the sb700 with incandescent filter attached and firing, while the sb600 is providing the light against the back wall. The cameras white balance is set to incandescent, so the sb700's light is correctly balanced and the sb600's light turns a lovely blue!

And here is the sb600, complete with home made cut-from-cornflakes-box-covered-in-silver-duct-tape gobo. It is held on the flash with a spare modelling balloon "borrowed" from my wife who uses these things to make balloon animals at childrens parties. Yeah, I know, but it works! ;^)

This combination now gives me a result that I like a little better! See for yourself:

And here is the promised set-up/pull-back shot:

The orange cloth is a cheap microfibre cloth which is great for cleaning surfaces, products, camera lenses, and my glasses. Never leave home without one. The table is a cheap fold down variety that is quite sturdy, but light weight. You can get them cheap at Netto in Scandinavia. That might be a bit far to travel for a cheap table if you live in the US or Africa (or elsewhere) so rather look out for one locally. But if you do decide to get one at Netto, look me up when you get to Malmö, I'll buy coffee!

One last piece of equipment that I used in this shot was the Nikon SG-3IR, which is a special cheap plastic flippy flappy thing that attaches to the cameras flash hotshoe and covers the built-in flash to filter out any light from the flash while still letting the infrared light through to maintain communications with the remote flashes without influencing the light on the subject (sneakers). It looks like so:

The photo of the sneakers was taken with a Nikon D90, AF-S DX Micro Nikkor 40mm f/2.8G, Aperture Priority mode, ISO200, 1/60s, f11.0, implementing Nikon's fantastic CLS system, hand held and processed in Adobe Lightroom 4.

Have a great day!

Small Speedlight Studio Setup on a budget.

Don't have enough for those very tempting studio lights down at the camera store, but have a couple of Speedlights in your camera bag? Well then you have pretty much all you need to take some pretty cool portraits!

This is my friend Chinedu, and he just wrote a book. Once I get the details of where to buy it I will post a link right here.

I took his portrait in my small home studio in the corner of our lounge and the set-up looks more or less like this:

That's a Nikon sb700 on the stand shooting into a black backed umbrella and throwing back oodles of beautiful light onto the victim model. On the chair at the back is a Nikon sb600 with a home crafted gobo made from a corn-flakes box covered in silver duct tape which is spitting out light onto the white wall behind the previously mentioned model. The end result is quite satisfactory, at least that's what I think!

Portrait in Monochrome

I used the set-up shown here: Portraits in small places

My Santa Set-up

Since the 5th of December I have been taking the typical Santa in the mall pics that we see every year! It's actually quite fun, but a lot of work as it has been crazy busy. While I have been there a lot of "pros" and amateurs alike have expressed an interest in my lighting set-up, how I do it, and why! It seems that the "strobist" concept hasn't caught on in South Africa the same way it has elsewhere in the world. So here is a short explanation and a few sample pics.

My basic setup is a couple of Nikon sb flashes, one sb700 and one sb600. I bounce both of these into umbrellas in order to diffuse the light and get a nice even lighting over the entire set. I use a shoot through umbrella and a black backed bounce umbrella, and the reason these two? Because it's what I have of course! If I used studio lights it would become much more complicated and require cables running electricity around for people to fall over, it wouldn't be as easy to unpack and pack, etc. Here is a pull back pic of the entire set-up:

There is a very large skylight directly above the area where we are located and the light coming in is constantly changing because of the sun moving, clouds, rain, etc. so in order to keep the light and colour consistant I totaly underexpose the scene by setting my camera to manual at 1/200s and f11. Without flash it looks like this:

My flashes are set to TTL and they automatically bring the exposure back up to normal. I fire them wirelessly via Nikons very cool CLS system. The final result looks like this:

Perfectly exposed, sharp, and with very consistant colour! I don't have time to download these to a computer, tweak them and then print them, so I shoot jpg and make sure that all my settings are correct in camera to achieve the fastest workflow and print them directly from my SD cards at the lab in the mall. The resultant prints are just great!

So if you want to put that nice shiny new dslr to good use and actually make some money to justify the expense then you now know how to do Santa pics for Christmas 2012! Whoohoo!

Simple Product Photography Set-Up.

Simple is always good!

And the result:

Shades

Another day another product shoot!

Nikon D90, manual mode, 200ISO, f11, 1/200s, Nikon 50mm f1.8D, Nikon sb700 and sb600 bounced in umbrellas left and right high. Set-up shot below.

Stock card seamless white background held up against the wall by duct tape. No photographer should ever be without duct tape!

This would have worked much better with a light tent... but I don't have one. Someone recently told me that photography is about problem solving, so sometimes you just gotta make a plan!
Note to self: get a light tent...

Portraits in small places

So you don't have a studio, and the wife won't let you convert the spare room either, and the garage is full of junk, so what to do to be able to use that shiny dslr and the speedlights you got for Christmas last year and you've been itching to put to good use? Well you make some compromises and improvise. I have been living in a small apartment for the past year and don't have much space, but I can still setup my lights for a two light pic like the one below:

Here is how I set it up:

By using the curtains as a backdrop and squeezing the lights in between couches and side tables I managed to get a fairly good two light portrait set-up. Behind the model is my Strobist DIY Beauty Dish on a tripod. To the right and high is a shoot through umbrella on my junky tripod converted to super cool light stand. Nikon sb600 in the beauty dish and sb700 in the umbrella, both triggered via Nikons very cool CLS system. Easy peasy!

Studio session with a Famous Fashion Icon!

Probably the most recognized face on the planet, and for all the wrong reasons. If you would like to practice portrait lighting setups on a small scale Barbie is your girl though! She doesn't charge much, she is very co-operative and always has a friendly smile. Oh, and she never complains about working long or odd hours.

Here is my small scale studio set-up:

The light on the left is my Strobist DIY Beauty Dish draped in a swathe of thin white material that basically turns it into a small softbox.

The Barbie doll was set into a cake and decorated for a 6 year olds birthday party.

Bowl of Rice

And below the set-up shot for "Bowl of Rice".

Normally I would try to get rid of the light spill from the flash shooting into the umbrella, but in this case it actually helped with the light I was trying to achieve by reflecting some light from slightly behind the subject.

Nikon D90, Nikkor 50mm f1.8D, f4.5, 1/200s, Nikon sb700 flash shot through a white umbrella with the wide angle flash diffuser out, hand held.

Toyota LandCruiser FJ62 4X4 Station Wagon

I am selling my trusty Toyota LandCruiser FJ62 4X4 Station Wagon.

Well looked after. Motor professionally redone last year by Toyota SA. Comes with bull bar, roof carrier, high lift jack, 4x metal Jerry Cans, full alarm/immobilizer/anti-hijack system, Dobinsons shocks and springs all around, recovery strap, window tinting and cd/radio. The "real deal" for overland travel through Africa!

If you are in the market for a good used 4X4 (and you live somewhere in Southern Africa!), then send me an email at thephotophile@gmail.com

And just in case you are interested, here is the obligatory set-up shot, it is a photography blog after all!

Nikon D90, 18-105 kit lens, taken in the middle of the day but in shade, zoomed to 52mm, manual mode, f8.0, 1/200s, ISO200, Nikon sb600 camera right and sb700 camera left fired wirelessly via Nikon's uber cool CLS system. I underexposed the shot a slight bit and let the flashes sort out their own exposure themselves via iTTL, this had the effect of a darker background which made the vehicle stand out. Isn't technology wonderful!?

Seamless White Background - How To

Just in case anybody was wondering how complicated it is to do a seamless white background product photo shot like the one below, I have included a shot at the bottom of this post to show how simple it can be done.

...and the promised setup shot:

Really not complicated at all! The flash was triggered via Nikon's cool CLS system. The groovy light stand is explained at another post here.

Eliminate That Hotspot!

While I was out shooting Santa last week I had some spare time to play with my flash and shoot through umbrella set-up and took the following shot:

As you can see there is a distinct hotspot in the umbrella. Not so great for even distribution of light, which is the point of the umbrella to start off with. Of course it does help to distribute light, but not as well as it could. The flash was set to about 50mm here, so I flipped out the built in diffuser and it automatically went to 14mm wide with the following result:

Beautiful even distribution of light resulting in a better wrap around effect for portraits!

The light stand used here is in fact a junky old cheap tripod with the head removed and refitted to an extension pole which I then mounted to the top of the junky old cheap tripod, I then drilled a hole through the plastic head (taking care to avoid anything important) and voila! Nice tall light stand for the man on a limited budget. Here is a close up of the head:

Some people say I'm tight, but I like to think of myself as frugal...
;-)